Celect Installation Handbook

4”AND 7” LAP INSTALLATION 4”AND 7” LAP INSTALLATION INSTALLATION SEQUENCE ❶ Weather Barrier & Flashings ❷ Furring strips for trim ❸ Inside Corner Posts ❹ Starter Strip for Panels ❺ Celect Siding Panels ❻ Window, Door, Etc. Trim Ÿ After preparing the walls for the siding installation ( see Wall Preparation pg. 1 ), install 1X2 furring around all windows, doors, outside corners, etc. This must be done anywhere the ends of the siding will be terminated (Fig 1-2). Ÿ Make sure to install the proper flashing as required by specific local building codes (Fig 2) NOTE: if the furring strips will be completely hidden by the trim, treated 1X2 furring can be used in place of PVC strips. Secure the furring every 8”- 12”. Furring Strips Fig. 1 INSTALLATION SEQUENCE ❶ Weather Barrier & Flashings ❷ Furring strips for trim ❸ Inside Corner Posts ❹ Starter Strip for Panels ❺ Celect Siding Panels ❻ Window, Door, Etc. Trim Ÿ After preparing the walls for the siding installation ( see Wall Preparation pg. 1 ), install 1X2 furring around all windows, doors, outside corners, etc. This must be done anywhere the ends of the siding will be terminated (Fig 1-2). Ÿ Make sure to install the proper flashing as required by specific local building codes (Fig 2) NOTE: if the furring strips will be completely hidden by the trim, treated 1X2 furring can be used in place of PVC strips. Secure the furring every 8”- 12”. Furring Strips F g. 1 • Aft r preparing the walls for the siding installation (see Wall P eparation pg. 1), install 1 x 2 furring around all indo s, doors, outside corners, etc. This must be done anywhe e he ends of the siding will be terminated (Fig.1-2). • Make sure to install th proper flashing as required by specific local building codes (Fig.2) NOTE: if th furring strips will be completely hidden by the trim, treated 1 x 2 furring can be us d in lac of PVC strips. Secure the furring every 8” - 12”. Installation Sequence 1. Weather Barrier & Flashing 2. Furring strips for trim 3. Inside Corner Posts 4. Starter Strip for Panels 5. Celect Siding Panels 6. Window, Door, Etc. Trim 4” and 7” Lap Installation

Flashing

1/2” to 1” panel gap depending upon course length

Flashing

1/2” to 1” pa el gap depending upon course length

Window Header

Window Header

1X2 Furring Strip 1X2 Furring Strip

Fig. 2

Fig. 2

18

18

18