Simpson Strong-Tie Wood Construction Connectors

Simpson Strong-Tie ® Wood Construction Connectors

Face-Mount Hangers — Rough Lumber (DF/SP)

Many of these products are approved for installation with Strong-Drive ® SD Connector screws. See pp. 348–352 for more information.

Codes: See p. 11 for Code Reference Key Chart

Dimensions (in.) W H B

Fasteners (in.)

DF/SP Allowable Loads (lb.)

Joist Size

Model No.

Code Ref.

Ga.

Header

Joist

Uplift (160)

Floor (100)

Snow (115)

Roof (125)

Sawn Lumber Sizes

1 1/2

(4) 0.162 x 3 1/2

(2) 0.148 x 1 1/2 (2) 0.148 x 1 1/2 (4) 0.148 x 1 1/2 (4) 0.148 x 1 1/2 (6) 0.148 x 1 1/2 (4) 0.148 x 1 1/2 (6) 0.148 x 1 1/2 (6) 0.148 x 1 1/2 (6) 0.148 x 1 1/2 (6) 0.148 x 1 1/2 (2) 0.162 x 3 1/2 (4) 0.162 x 3 1/2 (4) 0.162 x 3 1/2 (6) 0.162 x 3 1/2 (6) 0.162 x 3 1/2 (6) 0.162 x 3 1/2 (4) 0.162 x 3 1/2 (4) 0.162 x 3 1/2 (6) 0.162 x 3 1/2 (6) 0.162 x 3 1/2 (6) 0.162 x 3 1/2

240 240 540 535 850 535 850 990 990 990 240 535 535 990 990 990 535 535 990 990 990

555 575 835

630 650 950

655 705

—

LU24R-18

18 2 3 11/16 16 2 3 5/8

2x4(R)

U24R

2 (4) 0.162 x 3 1/2

IBC, FL, LA

LU26R-18 18 2 4 9/16

1 1/2

(6) 0.162 x 3 1/2

1,030 1,410 1,180 1,410 1,615 2,465 2,465 2,465 1,410 1,410 2,465 2,465 2,465 1,410 1,410 2,465 2,465 2,465 705

—

2x6(R)

U26R

16 2 5 5/8 18 2 6 5/8 16 2 5 5/8 16 2 9 1/8 16 2 9 1/8 16 2 9 1/8 16 4 2 5/8 16 4 4 5/8 16 4 4 5/8 16 4 8 1/8 16 4 8 1/8 16 4 8 1/8

2 (8) 0.162 x 3 1/2

1,150 1,110 1,150 1,390 2,015 2,015 2,015 1,150 1,150 2,015 2,015 2,015 1,150 1,150 2,015 2,015 2,015 575

1,305 1,180 1,305 1,580 2,280 2,280 2,280 1,305 1,305 2,280 2,280 2,280 1,305 1,305 2,280 2,280 2,280 650

IBC, FL, LA

1 1/2

(8) 0.162 x 3 1/2

—

LU28R-18

2x8(R)

U26R

2 (8) 0.162 x 3 1/2 2 (10) 0.162 x 3 1/2 2 (14) 0.162 x 3 1/2 2 (14) 0.162 x 3 1/2 2 (14) 0.162 x 3 1/2 2 (4) 0.162 x 3 1/2 2 (8) 0.162 x 3 1/2 2 (8) 0.162 x 3 1/2 2 (14) 0.162 x 3 1/2 2 (14) 0.162 x 3 1/2 2 (14) 0.162 x 3 1/2

IBC, FL, LA

LU210R-18 18 2 7 9/16

—

2x10(R)

U210R U210R U210R

2x12(R) 2x14(R)

4x4(R)

U44R

Solid Sawn Joist Hangers 4x6(R) U46R

4x8(R) 4x10(R) 4x12(R) 4x14(R) 6x6(R) 6x8(R) 6x10(R) 6x12(R) 6x14(R)

U46R U410R U410R U410R U66R U66R U610R U610R U610R

IBC, FL, LA

16 6

5 2 (8) 0.162 x 3 1/2

16 6 5 2 (8) 0.162 x 3 1/2

16 6 8 1/2 16 6 8 1/2 16 6 8 1/2

2 (14) 0.162 x 3 1/2 2 (14) 0.162 x 3 1/2 2 (14) 0.162 x 3 1/2

1. Uplift loads have been increased for earthquake or wind loading with no further increase allowed. Reduce where other loads govern. 2. DF/SP loads can be used for SCL with an equivalent specific gravity of 0.50 or greater. 3. HU hangers can be ordered in rough sizes at full table loads. Add “X” to the model designation (e.g., HU28X) and specify rough width or height. Maximum width 8". 4. Fasteners: Nail dimensions are listed diameter by length. See pp. 21–22 for fastener information.

Face-Mount Hangers — Rough Lumber (SPF/HF)

Dimensions (in.)

Fasteners (in.)

SPF/HF Allowable Loads (lb.)

Joist Size

Model No.

Ga.

W H

B

Header

Joist

Uplift (160) Floor (100)

Snow (115)

Roof (125)

Sawn Lumber Sizes

1 1/2

(4) 0.162 x 3 1/2 (4) 0.162 x 3 1/2 (6) 0.162 x 3 1/2 (8) 0.162 x 3 1/2 (8) 0.162 x 3 1/2 (8) 0.162 x 3 1/2 (10) 0.162 x 3 1/2 (14) 0.162 x 3 1/2 (14) 0.162 x 3 1/2 (14) 0.162 x 3 1/2 (4) 0.162 x 3 1/2 (8) 0.162 x 3 1/2 (8) 0.162 x 3 1/2 (14) 0.162 x 3 1/2 (14) 0.162 x 3 1/2 (14) 0.162 x 3 1/2 (8) 0.162 x 3 1/2 (8) 0.162 x 3 1/2 (14) 0.162 x 3 1/2 (14) 0.162 x 3 1/2 (14) 0.162 x 3 1/2

(2) 0.148 x 1 1/2 (2) 0.148 x 1 1/2 (4) 0.148 x 1 1/2 (4) 0.148 x 1 1/2 (6) 0.148 x 1 1/2 (4) 0.148 x 1 1/2 (6) 0.148 x 1 1/2 (6) 0.148 x 1 1/2 (6) 0.148 x 1 1/2 (6) 0.148 x 1 1/2 (2) 0.162 x 3 1/2 (4) 0.162 x 3 1/2 (4) 0.162 x 3 1/2 (6) 0.162 x 3 1/2 (6) 0.162 x 3 1/2 (6) 0.162 x 3 1/2 (4) 0.162 x 3 1/2 (4) 0.162 x 3 1/2 (6) 0.162 x 3 1/2 (6) 0.162 x 3 1/2 (6) 0.162 x 3 1/2

205 205 465 460 730 460 730 850 850 850 205 460 460 850 850 850 460 460 850 850 850

475 495 720 990 955 990

540 560 815

565 605 885

LU24R-18

18 16 18 16 18 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16

2 2 2 2 2 2 2 2 2 2 4 4 4 4 4 4 6 6 6 6 6

3 11/16 3 5/8 4 9/16 5 5/8 6 3/8 5 5/8 7 9/16 9 1/8 9 1/8 9 1/8 2 5/8 4 5/8 4 5/8 8 1/8 8 1/8 8 1/8

2x4(R)

U24R

2

LU26R-18

1 1/2

2x6(R)

U26R

2

1,120 1,015 1,120 1,360 1,960 1,960 1,960 1,120 1,120 1,960 1,960 1,960 1,120 1,120 1,960 1,960 1,960 560

1,215 1,015 1,215 1,390 2,120 2,120 2,120 1,215 1,215 2,120 2,120 2,120 1,215 1,215 2,120 2,120 2,120 605

LU28R-18

1 1/2

2x8(R)

U26R

2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

LU210R-18 18

1,195 1,735 1,735 1,735

2x10(R)

U210R U210R U210R U44R U46R U46R U410R U410R U410R U66R U66R U610R U610R U610R

2x12(R) 2x14(R) 4x4(R) 4x6(R) 4x8(R) 4x10(R) 4x12(R) 4x14(R) 6x6(R) 6x8(R) 6x10(R) 6x12(R) 6x14(R)

495 990 990

C-C-2021 ©2021 SIMPSON STRONG-TIE COMPANY INC.

1,735 1,735 1,735

5 5

990 990

8 1/2 8 1/2 8 1/2

1,735 1,735 1,735

1. Uplift loads have been increased for earthquake or wind loading with no further increase allowed. Reduce where other loads govern. 2. DF/SP loads can be used for SCL with an equivalent specific gravity of 0.50 or greater. 3. HU hangers can be ordered in rough sizes at full table loads. Add “X” to the model designation (e.g., HU28X) and specify rough width or height. Maximum width 8". 4. Fasteners: Nail dimensions are listed diameter by length. See pp. 21–22 for fastener information.

114